NSN 5306-00-332-4500
Close Tolerance Hex Head Bolt
Between 1.724 inches and 1.754 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number VAL23033-6-18 for national stock number 5306003324500.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-332-4500.
-
MPN or Model
VAL23033-6-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.589 inches and 0.639 inches -
Fastener Length
Between 1.724 inches and 1.754 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-102-0312 MPN 3M926-5L16Close Tolerance Screw
- 5305-01-477-5619 MPN ST3M652C4-11AClose Tolerance Screw
- 5305-01-502-0060 MPN 3M1170C3-13AClose Tolerance Screw
- 5306-00-762-2904 MPN MS21250-06024Shear Bolt
- 5306-01-054-3407 MPN C7521-4-8Shear Bolt
- 5306-01-054-3421 MPN C7521L6-18Shear Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-141-7877 MPN VAL23608-4D5Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-332-4500 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL23033-6-18 | Valley-todeco, Inc. |
79328-6-18 | Sps Technologies, Llc |
MB84-6-18 | Hi-shear Corporation |
VS3060-6-18 | Arconic Global Fasteners & Rings, |
S371-6-18 | Huck International, Inc. |
MB84-6-18 | Lisi Aerospace Canada Corp |
ST3M571-6-18 | Boeing Company, The |
74328-6-18 | Sps Technologies, Llc |
AIC752-6-18 | Sps Technologies, Llc |
ST3M571-6-18 | Sps Technologies, Llc |
S11-1059-6-18 | Sonic Industries Inc. |
79328-6-18 | Sps Technologies Inc |
BM3326-6-18 | Huck Intl Inc |
S371-6-18 | Huck Intl Inc |
VS3060-6-18 | Alcoa Global Fasteners, Inc. |