NSN 5306-00-451-8973
Coaxial Connector
Between 2.277 inches and 2.324 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSB22-4A32 for national stock number 5306004518973.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-451-8973.
-
MPN or Model
EWSB22-4A32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 2.277 inches and 2.324 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-107, standard pressed steel co mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-043-0417 MPN NAS1124-1HClose Tolerance Screw
- 5305-00-067-7811 MPN SFH22-6A18Machine Screw
- 5305-00-078-9635 MPN SFT22-5-8Machine Screw
- 5305-00-107-1989 MPN NAS1189-04P3Socket Head Cap Screw
- 5305-00-199-1595 MPN 3M123-3-5PClose Tolerance Screw
- 5305-00-233-6065 MPN 106385PT3-15Close Tolerance Screw
- 5305-00-753-4305 MPN 10-32NF3AX1-2Socket Head Cap Screw
- 5305-00-833-3273 MPN NAS1124-2Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-451-8973 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-4A32 | Sps Technologies, Llc |
EWSB22-4A32 | Sps Technologies, Llc |
C081-4-32 | Lockheed Martin Corporation |