NSN 5306-00-479-5188
Coaxial Connector
Between 1.675 inches and 1.705 inches fastener length, double hexagon w/hole head style, 0.504 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 68486-8-014 for national stock number 5306004795188.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-479-5188.
-
MPN or Model
68486-8-014
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.790 inches and 0.840 inches -
Fastener Length
Between 1.675 inches and 1.705 inches -
Head Style
Double hexagon w/hole -
Head Height
0.504 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
Between 0.113 inches and 0.133 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
H-11 stsbs002, fscm 98897 mfr ref single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsbs 002, lockheed-georgia co mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-324-9249 MPN 11905-3L4Close Tolerance Screw
- 5305-01-215-1367 MPN 11873-7-15-9Close Tolerance Screw
- 5305-01-394-5976 MPN 11909V5L7-1Close Tolerance Screw
- 5305-01-406-5023 MPN 11855V3-5 118Machine Screw
- 5305-01-514-0558 MPN 11923-3-1Close Tolerance Screw
- 5320-01-096-3125 MPN TL512-5-14Pin-rivet
- 5320-01-231-5945 MPN TL210-8-23Pin-rivet
- 5320-01-280-5949 MPN TL240-6-27Pin-rivet
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-479-5188 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68486-8-014 | Sps Technologies, Llc |
11695A08U014 | Reid Products Inc. |
STSBG002A08U014 | Lockheed Martin Corporation |