NSN 5306-00-492-6980
Coaxial Connector
Between 2.281 inches and 2.311 inches fastener length, double hexagon w/hole head style, 0.254 inches head height, width between flats: between 0.304 inches and 0.315 inches .
Manufacturer part number 68487-4-028 for national stock number 5306004926980.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-492-6980.
-
MPN or Model
68487-4-028
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.521 inches and 0.571 inches -
Fastener Length
Between 2.281 inches and 2.311 inches -
Head Style
Double hexagon w/hole -
Head Height
0.254 inches -
Width Between Flats
Between 0.304 inches and 0.315 inches -
Extended Washer Diameter
Between 0.465 inches and 0.475 inches -
Extended Washer Thickness
0.042 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Stsbs003, fscm 98897 mfr ref single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsbs003, fscm 98897 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-271-1797 MPN LD111-0044-2413Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5305-01-515-4398 MPN BACB30NN4K14Close Tolerance Screw
- 5306-00-150-3574 MPN GB511GG-7A-29AShear Bolt
- 5306-01-044-7447 MPN ST3M497-5-8Shoulder Bolt
- 5306-01-044-8494 MPN VAL23607-3-20Shoulder Bolt
- 5306-01-055-0159 MPN C7521-4-5Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-492-6980 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68487-4-028 | Sps Technologies, Llc |
STSBG003A04U028 | Sps Technologies, Llc |
STSBG003A04U028 | Valley-todeco, Inc. |
STSBG003A04U028 | Sps Technologies, Llc |
STSBG003A04U028 | Sonic Industries Inc. |
STSBG003A04U028 | Sps Technologies, Llc |
11699A04U028 | Reid Products Inc. |
STSBG003A04U028 | Alcoa Global Fasteners, Inc. |
STSBG003A04U028 | Lockheed Martin Corporation |