NSN 5306-00-493-4807
Close Tolerance Hex Head Bolt
Between 1.027 inches and 1.074 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 68484-4-012 for national stock number 5306004934807.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-493-4807.
-
MPN or Model
68484-4-012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.324 inches -
Fastener Length
Between 1.027 inches and 1.074 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.902 inches first hole and 0.934 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsbs000 fscm 98895 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-4217 MPN LS9682V8Machine Screw
- 5305-01-015-6646 MPN ST3M454-3L-3Close Tolerance Screw
- 5305-01-129-5533 MPN ST3M454-3DL9Close Tolerance Screw
- 5305-01-172-8200 MPN HS4727-3-26Close Tolerance Screw
- 5305-01-217-2185 MPN BACB30LU8-8Close Tolerance Screw
- 5305-01-240-5184 MPN 3M925C3-19AClose Tolerance Screw
- 5305-01-412-5357 MPN LD111-0045-2409Close Tolerance Screw
- 5305-01-563-3863 MPN ST3M557-6-13Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-493-4807 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68484-4-012 | Sps Technologies, Llc |
VAL23611-4DS012 | Valley-todeco, Inc. |
AIC2263A04D012 | Sps Technologies, Llc |
PBF1041A4D012 | Sps Technologies, Llc |
VS2978A04D012 | Arconic Global Fasteners & Rings, |
BM3200-4A012D | Huck International, Inc. |
STSBG000A04D012 | Sonic Industries Inc. |
11797A04D012 | Reid Products Inc. |
STSBG000A04D012 | Lockheed Martin Corporation |
BM3200-4A012D | Huck Intl Inc |
VS2978A04D012 | Alcoa Global Fasteners, Inc. |
68484-4-012 | Sps Technologies, Llc |