NSN 5306-00-514-8235
Coaxial Connector
Between 0.963 inches and 0.993 inches fastener length, double hexagon w/hole head style, between 0.186 inches and 0.206 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 70718V3-10 for national stock number 5306005148235.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-514-8235.
-
MPN or Model
70718V3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.353 inches -
Fastener Length
Between 0.963 inches and 0.993 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.186 inches and 0.206 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
Between 0.054 inches and 0.074 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-5461 MPN 73573-95-13CSocket Head Cap Screw
- 5305-01-013-9600 MPN 73991H7D29Close Tolerance Screw
- 5306-00-324-7716 MPN 74328-12-82Close Tolerance Bolt
- 5320-00-047-4523 MPN HLT170-6Pin-rivet Collar
- 5320-00-291-5428 MPN HL610-5-6Pin-rivet
- 5320-00-325-2831 MPN HL645LL8-6Pin-rivet
- 5305-00-086-2455 MPN NAS1202-8Close Tolerance Screw
- 5305-01-020-9569 MPN NAS1189-4P9Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-514-8235 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70718V3-10 | Sps Technologies, Llc |
70718V3-10 | Sps Technologies Inc |