NSN 5306-00-514-8244
Coaxial Connector
Between 1.150 inches and 1.180 inches fastener length, double hexagon w/hole head style, between 0.186 inches and 0.206 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 70718V3-13 for national stock number 5306005148244.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-514-8244.
-
MPN or Model
70718V3-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.353 inches -
Fastener Length
Between 1.150 inches and 1.180 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.186 inches and 0.206 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
Between 0.054 inches and 0.074 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-500-2908 MPN 54266-3-2Close Tolerance Screw
- 5320-00-093-7444 MPN 106677-8-10Solid Rivet
- 5320-00-153-2346 MPN HL962-8-7Pin-rivet
- 5305-00-008-5906 MPN NAS1189E02T6LSocket Head Cap Screw
- 5305-00-155-2101 MPN 28711-98C12Setscrew
- 5305-00-308-1540 MPN 73573-93-6CSocket Head Cap Screw
- 5305-00-369-0750 MPN 66117H5-10Close Tolerance Screw
- 5305-00-494-5678 MPN 106580-1Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-514-8244 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70718V3-13 | Sps Technologies, Llc |
70718V3-13 | Sps Technologies Inc |
70718V3-13 | Sps Technologies, Llc |
70718V3-13 | Sps Technologies Inc |