NSN 5305-00-035-5329
High Torque Screw
Between 1.201 inches and 1.248 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 3M263-5-12 for national stock number 5305000355329.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-035-5329.
-
MPN or Model
3M263-5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.201 inches and 1.248 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
11050 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps13145, 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-061-6462 MPN GS551C3-158Shoulder Screw
- 5305-00-310-5210 MPN E723-206Socket Head Cap Screw
- 5305-01-047-0482 MPN HT4011-6-13Close Tolerance Screw
- 5305-01-048-6598 MPN LS15237-5-12Close Tolerance Screw
- 5305-01-056-1512 MPN BACB30LU4-27Close Tolerance Screw
- 5305-01-064-2340 MPN NAS1190-08P10BSocket Head Cap Screw
- 5305-01-100-9137 MPN NAS1101-4-48Machine Screw
- 5305-01-115-8825 MPN DMG7900-8-A-3Panel Screw Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-035-5329 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M263-5-12 | Boeing Company, The |
66117H5-12 | Sps Technologies, Llc |
66117H5-12 | Sps Technologies, Llc |
HS2623-5Z-12 | Huck International, Inc. |
66117H5-12 | Christie Brown And Co Ltd |
HT195-5-12 | Hi-shear Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)