NSN 5306-00-522-9021
Close Tolerance Hex Head Bolt
Between 2.312 inches and 2.379 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 68484-6A31 for national stock number 5306005229021.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-522-9021.
-
MPN or Model
68484-6A31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.451 inches -
Fastener Length
Between 2.312 inches and 2.379 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsb5000 fscm 88630 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-027-4661 MPN ST3M652C4-8AClose Tolerance Screw
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5306-00-443-6799 MPN STSBG002A04U018Shear Bolt
- 5306-01-043-0549 MPN VCD0020-6-20DShear Bolt
- 5306-01-054-3409 MPN C7521-5-10Shear Bolt
- 5306-01-054-3414 MPN C7521-6-7Shear Bolt
- 5306-01-141-7884 MPN VAL23608-7-40Shoulder Bolt
- 5306-01-142-2898 MPN VAL23608-8D39Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-522-9021 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68484-6A31 | Sps Technologies, Llc |
STSBG000A06U31 | Lockheed Martin Corporation |
VS2978A06U31 | Alcoa Global Fasteners, Inc. |
VAL23611-6D31 | Valley-todeco, Inc. |
PBF1041A6U31 | Sps Technologies, Llc |
68484-6A31 | Sps Technologies, Llc |
AIC2263A06U031 | Sps Technologies, Llc |
BM3200-6A31 | Huck International, Inc. |
11797A06U031 | Reid Products Inc. |
BM32006A31 | Aircraft Gear Corp |
BM3200-6A31 | Huck Intl Inc |
AIC2263A06U31 | Sps Technologies, Llc |