NSN 5306-00-558-4895
Wheel Bolt
1.188 inches fastener length, double hexagon w/hole head style, 0.330 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number MS9034-17 for national stock number 5306005584895.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-558-4895.
-
MPN or Model
MS9034-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
1a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
1.188 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.370 inches and 0.438 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-020-7903 MPN MS3134E19-4PElectrical Receptacle Connector
- 5930-00-044-3514 MPN MS25201-2Toggle Switch
- 5930-00-050-2627 MPN MS25098-1Toggle Switch
- 5950-00-062-5691 MPN MS16476-1Reactor
- 5905-00-141-1149 MPN MS35044-91Composition Fixed Resistor
- 5935-00-142-0365 MPN MS3106F36-3SElectrical Plug Connector
- 5935-00-175-4237 MPN MS25042-36DAElectrical Connector Cover
- 5905-00-195-6809 MPN MS35043-204Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-558-4895 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9034-17 | Military Standards |