NSN 5306-00-579-3615
Wheel Bolt
0.969 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN8C7 for national stock number 5306005793615.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-579-3615.
-
MPN or Model
AN8C7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.781 inches -
Fastener Length
0.969 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
0.188 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.797 inches first hole -
Material
Stainless steel -
Material Specification
Qq-s-770 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-111-7590 MPN AN3106A28-21PWElectrical Plug Connector
- 5305-00-144-3898 MPN AN500A416-8Machine Screw
- 5305-00-151-0371 MPN AN500A8-16Machine Screw
- 5305-00-151-0682 MPN AN526-632-16Machine Screw
- 5305-00-151-2289 MPN AN507-832R4Machine Screw
- 5305-00-151-3574 MPN AN515-3-16Machine Screw
- 5305-00-156-2858 MPN AN505-4R14Machine Screw
- 5305-00-206-0734 MPN AN526-832-8Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-579-3615 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN8C7 | Aeronautical Standards Group |