NSN 5306-00-579-4255
Coaxial Connector
1.250 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS1105-14D for national stock number 5306005794255.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-579-4255.
-
MPN or Model
NAS1105-14D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.475 inches -
Fastener Length
1.250 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.131 inches first hole -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-023-5867 MPN NAS602-2Machine Screw
- 5305-00-052-9050 MPN MS24630-35Tapping Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-218-5447 MPN NAS1635-02-8Machine Screw
- 5305-00-225-7776 MPN NAS1351C4-24Socket Head Cap Screw
- 5305-00-253-5230 MPN MS21125-0431Close Tolerance Screw
- 5305-00-269-2810 MPN MS90726-68Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-579-4255 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1105-14D | National Aerospace Standards |