NSN 5306-00-582-9008
Wheel Bolt
Between 2.312 inches and 2.359 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN6C22A for national stock number 5306005829008.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-582-9008.
-
MPN or Model
AN6C22A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.609 inches and 0.687 inches -
Fastener Length
Between 2.312 inches and 2.359 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.672 inches and 1.703 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-6609 MPN AN3100E28-17PElectrical Receptacle Connector
- 5935-00-280-1876 MPN AN3102-28-1SElectrical Receptacle Connector
- 5935-00-642-4244 MPN AN3108A32-4PElectrical Plug Connector
- 5925-00-174-8804 MPN MS25005-10Circuit Breaker
- 5305-00-068-7048 MPN AN509DD8-12Machine Screw
- 5305-00-151-0565 MPN AN526-836R8Machine Screw
- 5305-00-151-1681 MPN AN505-2-3Machine Screw
- 5305-00-151-3220 MPN AN510-10-7Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-582-9008 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN6C22A | Aeronautical Standards Group |
Stock Check
- NS: 3
- NE: 188