NSN 5306-00-584-5232
Close Tolerance Hex Head Bolt
Between 1.453 inches and 1.500 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN177H13A for national stock number 5306005845232.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-584-5232.
-
MPN or Model
AN177H13A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.704 inches -
Fastener Length
Between 1.453 inches and 1.500 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 0.796 inches and 0.828 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-149-3457 MPN AN3102A20-4PElectrical Receptacle Connector
- 5935-00-259-2698 MPN AN3102A24-11SElectrical Receptacle Connector
- 5935-00-280-1908 MPN AN3100C18-1SElectrical Receptacle Connector
- 5935-00-280-2040 MPN AN3102C20-7PElectrical Receptacle Connector
- 5935-00-552-2384 MPN MS3106A14S9SElectrical Plug Connector
- 5935-00-644-5110 MPN AN3106A20-8PElectrical Plug Connector
- 5985-00-682-2700 MPN MX554AUElectrical Dummy Load
- 5305-00-206-7338 MPN AN565F4H6Setscrew
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-584-5232 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN177H13A | Aeronautical Standards Group |
AN177H13A | Aeronautical Standards Group |
AN177H13A | Aeronautical Standards Group |
AN177H13A | Aeronautical Standards Group |
AN177H13A | Aeronautical Standards Group |