NSN 5306-00-584-5652
Close Tolerance Hex Head Bolt
Between 0.515 inches and 0.562 inches fastener length, between 0.109 inches and 0.141 inches head height, 125000 pounds per square inch min. tensile strength (psi), material: steel comp 431 .
Manufacturer part number AN173CH-4A for national stock number 5306005845652.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-584-5652.
-
MPN or Model
AN173CH-4A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 0.515 inches and 0.562 inches -
Head Height
Between 0.109 inches and 0.141 inches -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response
More from these suppliers
- 5935-00-201-4577 MPN AN3108B20-27PWElectrical Plug Connector
- 5935-00-222-7867 MPN AN3106A32-102PElectrical Plug Connector
- 5935-00-236-8264 MPN AN3102A22-33PElectrical Receptacle Connector
- 5935-00-636-8303 MPN AN3102E18-22PElectrical Receptacle Connector
- 5935-00-665-5876 MPN AN3108B24-7PElectrical Plug Connector
- 4820-00-684-4584 MPN AN6280-8Check Valve
- 5935-00-148-9311 MPN AN3108B24-9PElectrical Plug Connector
- 5305-00-151-0172 MPN AN520-4-4Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-584-5652 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173CH-4A | Zf Industrieantriebe Witten Gmbh |
AN173CH4A | Aeronautical Standards Group |
AN173CH-4A | Zf Industrieantriebe Witten Gmbh |
AN173CH4A | Aeronautical Standards Group |
AN173CH-4A | Zf Industrieantriebe Witten Gmbh |
AN173CH4A | Aeronautical Standards Group |