NSN 5306-00-619-1095
Coaxial Connector
Between 0.551 inches and 0.566 inches fastener length, hexagon head style, between 0.125 inches and 0.145 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1104-4W for national stock number 5306006191095.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-619-1095.
-
MPN or Model
NAS1104-4W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 0.551 inches and 0.566 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.145 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-003-8156 MPN NAS1351-4-36PSocket Head Cap Screw
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-050-4272 MPN NAS1096-2-4Machine Screw
- 5305-00-071-2089 MPN MS51957-89Machine Screw
- 5305-00-147-4750 MPN NAS1189C3P14NSocket Head Cap Screw
- 5305-00-205-3596 MPN MS51958-67BMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-619-1095 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1104-4W | National Aerospace Standards |