NSN 5306-00-638-4649
Coaxial Connector
1.406 inches fastener length, hexagon head style, 0.094 inches head height, width between flats: 0.375 inches .
Manufacturer part number NAS464P3-17 for national stock number 5306006384649.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-638-4649.
-
MPN or Model
NAS464P3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.344 inches -
Fastener Length
1.406 inches -
Head Style
Hexagon -
Head Height
0.094 inches -
Width Between Flats
0.375 inches -
Grip Diameter
0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Single Shear Strength
2690 pounds per square inch -
Thread Diameter
0.190 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.250 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-454-6905 MPN NAS1653R10B6SNElectrical Plug Connector
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5305-00-004-3129 MPN NAS1190C04P15LSocket Head Cap Screw
- 5305-00-052-5952 MPN MS35198-103Machine Screw
- 5305-00-057-9088 MPN MS51021-74Setscrew
- 5305-00-058-9388 MPN MS51977-73Setscrew
- 5305-00-059-4579 MPN NAS1133-6Close Tolerance Screw
- 5305-00-060-6184 MPN NAS2804-8Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-638-4649 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P3-17 | National Aerospace Standards |