NSN 5306-00-651-0689
Coaxial Connector
Between 7.937 inches and 7.984 inches fastener length, hexagon head style, between 0.422 inches and 0.454 inches head height, width between flats: between 1.240 inches and 1.253 inches .
Manufacturer part number 89WM10968-3 for national stock number 5306006510689.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-651-0689.
-
MPN or Model
89WM10968-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.672 inches -
Fastener Length
Between 7.937 inches and 7.984 inches -
Head Style
Hexagon -
Head Height
Between 0.422 inches and 0.454 inches -
Width Between Flats
Between 1.240 inches and 1.253 inches -
Grip Diameter
Between 0.8727 inches and 0.8735 inches -
Shank Unthreaded Hole Diameter
0.138 inches first hole and 0.145 inches first hole -
Thread Diameter
0.875 inches -
Grip Length
7.312 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 42.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
7.734 inches first hole and 7.766 inches first hole -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-p-416, type 2 federal specification single treatment response head -
Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unf
More from these suppliers
- 5945-00-025-1174 MPN GR835PE2Electromagnetic Relay
- 5935-00-058-1781 MPN GC831L74SElectrical Plug Connector
- 1560-00-066-2942 MPN 123BP10043-1Air Scoop Assembly
- 1560-00-077-2196 MPN 128ABP10105-3Cover Assembly
- 5935-00-134-9711 MPN GC800RA37-19S1Electrical Plug Connector
- 5935-00-153-3923 MPN GA800RH16-5Electrical Connector Backshell
- 5935-00-164-9666 MPN GA800CE4Connector Adapter
- 5945-00-168-8433 MPN 1128SCAV678-1Electromagnetic Relay
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-651-0689 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
89WM10968-3 | Northrop Grumman Systems Corporation |