NSN 5306-00-722-2409
Wheel Bolt
Between 1.490 inches and 1.510 inches fastener length, double hexagon w/hole head style, between 0.250 inches and 0.270 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9146-22 for national stock number 5306007222409.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-722-2409.
-
MPN or Model
MS9146-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.695 inches -
Fastener Length
Between 1.490 inches and 1.510 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.250 inches and 0.270 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.815 inches and 0.875 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-102-7999 MPN MS16108-10Tip Jack
- 5905-00-138-7140 MPN RCR42G101JRComposition Fixed Resistor
- 5935-00-165-3342 MPN MS3476L16-26PElectrical Plug Connector
- 5950-00-171-0067 MPN MS75084-11Radio Frequency Coil
- 5935-00-241-7143 MPN MS3102A36-7PYElectrical Receptacle Connector
- 5935-00-249-0153 MPN MS17344R20C33SElectrical Plug Connector
- 5935-00-251-7668 MPN MS3106A24-5PElectrical Plug Connector
- 5935-00-280-1882 MPN MS3102A24-12PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-722-2409 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9146-22 | Military Standards |