NSN 5305-00-971-7467
High Torque Screw
Between 0.952 inches and 0.999 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CA7 for national stock number 5305009717467.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-971-7467.
-
MPN or Model
NAS336CA7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.631 inches and 0.651 inches -
Fastener Length
Between 0.952 inches and 0.999 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.375 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Width Across Flats
Between 0.220 inches and 0.222 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5305-00-053-8077 MPN MS24677-104Socket Head Cap Screw
- 5305-00-110-5610 MPN MS27039-0832Machine Screw
- 5305-00-123-2711 MPN MS35308-389Hexagon Head Cap Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
- 5305-00-211-9041 MPN NAS1218-5-31Machine Screw
- 5305-00-231-4539 MPN NAS334CF7Close Tolerance Screw
- 5305-00-514-9693 MPN NAS517-5-23Machine Screw
- 5305-00-527-4567 MPN NAS334CPA7-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-971-7467 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CA7 | National Aerospace Standards |