NSN 5306-00-761-3382
Coaxial Connector
Between 1.354 inches and 1.401 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number EWSB930-7-14 for national stock number 5306007613382.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-761-3382.
-
MPN or Model
EWSB930-7-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.469 inches and 0.536 inches -
Fastener Length
Between 1.354 inches and 1.401 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
180000 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Material
Steel -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-486-2284 MPN AIC82-4-17Close Tolerance Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-215-0084 MPN AIC4043-3-06Machine Screw
- 5305-01-246-3864 MPN AIC811-04-21Socket Head Cap Screw
- 5305-01-398-7402 MPN AIC1652-4-8Close Tolerance Screw
- 5305-01-531-3829 MPN AIC1686V04-27Machine Screw
- 5305-01-556-9992 MPN TX1026V6-5AClose Tolerance Screw
- 5305-01-605-1300 MPN BACS12ER04K18Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-761-3382 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB930-7-14 | Sps Technologies, Llc |
AIC930-7-14 | Sps Technologies, Llc |
VS2767-7C14 | Alcoa Global Fasteners, Inc. |
C078-7-14 | Lockheed Martin Corporation |