NSN 5306-00-765-2967
Coaxial Connector
3.806 inches fastener length, double hexagon w/hole head style, 0.711 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number MS21250-12044 for national stock number 5306007652967.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-765-2967.
-
MPN or Model
MS21250-12044
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.046 inches and 1.066 inches -
Fastener Length
3.806 inches -
Head Style
Double hexagon w/hole -
Head Height
0.711 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
0.178 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 2.740 inches and 2.760 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-00-158-0772 MPN 9642M19P04Locating Bolt
- 5306-00-205-3521 MPN VFK100G-05052Shear Bolt
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-00-541-9490 MPN VAL23029-6D19Close Tolerance Bolt
- 5306-01-026-5776 MPN VAL22034-7G28Shear Bolt
- 5306-01-045-2868 MPN VAL23608-4-23Shoulder Bolt
- 5306-01-046-1193 MPN VAL23033-4X10Shoulder Bolt
- 5306-01-141-7183 MPN VAL23607-6-14Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-765-2967 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-12044 | Sps Technologies, Llc |
MS21250-12044 | Arconic Global Fasteners & Rings, |
MS21250-12044 | Sps Technologies, Llc |
MS21250-12044 | Sps Technologies, Llc |
MS21250-12044 | Hi-shear Corporation |
MS21250-12044 | Lisi Aerospace Canada Corp |
VAL21013-12044 | Valley-todeco, Inc. |
MS21250-12044 | National Aerospace Standards |
MS21250-12044 | Alcoa Global Fasteners, Inc. |
MS21250-12044 | Huck International, Inc. |
MS21250-12044 | Military Standards |
MS21250-12044 | Huck Intl Inc |
MS21250-12044 | Mercury Aerospace Fasteners Inc |