NSN 5306-00-775-3360
Close Tolerance Hex Head Bolt
2.375 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: 0.500 inches .
Manufacturer part number 51B464-5A32 for national stock number 5306007753360.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-775-3360.
-
MPN or Model
51B464-5A32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
2.375 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
0.500 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
2.000 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
76823-51b464 manufacturers standard
More from these suppliers
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-01-217-4009 MPN AIC4040-3-09RClose Tolerance Screw
- 5305-01-381-1927 MPN AIC818-4-309CSocket Head Cap Screw
- 5305-01-381-2331 MPN AIC812-3-14Machine Screw
- 5305-01-386-2977 MPN AIC1700-5-12Close Tolerance Screw
- 5305-01-412-5361 MPN LD111-0044-0812Close Tolerance Screw
- 5305-01-435-0056 MPN BACB30LU10-40Close Tolerance Screw
- 5305-01-435-5847 MPN BACB30LU8-37Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-775-3360 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B464-5A32 | Huck International, Inc. |
51B464-5A32 | Northrop Grumman Technical Services, |
51B464-5A32 | Northrop Grumman Systems Corporation |
51B464-5A32 | Sps Technologies, Llc |
51B464-5A32 | Arconic Global Fasteners & Rings, |
51B464-5A32 | Sps Technologies, Llc |
51B464-5A32 | Hi-shear Corporation |
51B464-5A32 | Sps Technologies, Llc |
51B464-5A32 | Alcoa Global Fasteners, Inc. |
51B464-5A32 | Lisi Aerospace Canada Corp |
51B464-5A32 | Huck Intl Inc |