NSN 5306-00-784-2977
Close Tolerance Hex Head Bolt
Between 0.950 inches and 0.970 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 37B201344P101 for national stock number 5306007842977.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-784-2977.
-
MPN or Model
37B201344P101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.910 inches -
Fastener Length
Between 0.950 inches and 0.970 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.630 inches and 0.650 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-b-6812 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-051-3813 MPN 21C2751G001Test Adapter
- 5905-00-081-0711 MPN 7055311G1Nonprecision Nonwire Wound Variable Resistor
- 5950-00-093-6095 MPN 7014878P1Radio Frequency Coil
- 5905-00-100-2558 MPN M7471804P34Noninductive Wire Wound Fixed Resistor
- 4820-00-149-2160 MPN 6681451-2Valve Disk
- 5950-00-228-4789 MPN K47J101G3Radio Frequency Transformer
- 5950-00-230-0250 MPN K44J202-2Radio Frequency Transformer
- 5945-00-244-8366 MPN L6923879REV1Electromagnetic Relay
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-784-2977 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
37B201344P101 | General Electric Company |
37B201344P101 | General Electric Co |