NSN 5306-00-810-7157
Close Tolerance Hex Head Bolt
Between 1.015 inches and 1.062 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174DDH10A for national stock number 5306008107157.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-810-7157.
-
MPN or Model
AN174DDH10A
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 1.015 inches and 1.062 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
End Application
Spec item -
Thread Diameter
0.250 inches -
Grip Length
Between 0.609 inches and 0.641 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
62000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Surface Treatment
Anodize or oxide film -
Surface Treatment Specification
Mil-a-8625 military specification 1st treatment response or mil-c-5541 military specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-4557 MPN AN3100E24-28PXElectrical Receptacle Connector
- 5935-00-201-7864 MPN AN3107A12S-3PElectrical Plug Connector
- 5935-00-518-8572 MPN AN3108B28-21PXElectrical Plug Connector
- 5935-00-542-8818 MPN AN3106E20-21SCElectrical Plug Connector
- 5935-01-067-7920 MPN AN507-8-32R12Electrical Receptacle Connector
- 5935-01-237-2394 MPN AN3101A12-5PElectrical Plug Connector
- 5925-00-104-5761 MPN AN3160-50Circuit Breaker
- 5925-00-153-4507 MPN AN3160-10Circuit Breaker
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-810-7157 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174DDH10A | Aeronautical Standards Group |
AN174DDH10A | Aeronautical Standards Group |