NSN 5306-00-811-0588
Wheel Bolt
0.562 inches fastener length, double hexagon w/hole head style, 0.375 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS9148-05 for national stock number 5306008110588.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-811-0588.
-
MPN or Model
MS9148-05
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.562 inches -
Fastener Length
0.562 inches -
Head Style
Double hexagon w/hole -
Head Height
0.375 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
0.500 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-008-4327 MPN MS2426R22T55P9Electrical Plug Connector
- 5950-00-035-4419 MPN MS75083-09Radio Frequency Coil
- 5935-00-071-9957 MPN MS24264R14B4PNElectrical Receptacle Connector
- 5940-00-113-3137 MPN 7891270P001Lug Terminal
- 5940-00-143-4774 MPN MS25036-153Lug Terminal
- 5935-00-149-3423 MPN MS3102A20-3PElectrical Receptacle Connector
- 5940-00-150-4589 MPN MS18029-2S-3Terminal Board Cover
- 5975-00-156-3253 MPN MS3367-2-9Electrical Components Tiedown Strap
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-811-0588 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9148-05 | Military Standards |