NSN 5306-00-827-1972
Wheel Bolt
0.547 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number MS20033-1 for national stock number 5306008271972.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-827-1972.
-
MPN or Model
MS20033-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
013280 - Alum Bolts -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.422 inches -
Fastener Length
0.547 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Thread Diameter
0.190 inches -
Grip Length
0.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
110000 pounds per square inch -
Minimum Yield Strength
90000 pounds per square inch -
Material
Stainless steel -
Material Specification
Mil-b-7874 military specification single material response -
Surface Treatment
Passivate -
Special Test Features
Rupture strength at 1200 deg. F shall not be less than 47000 psi in 100 hours -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-356-1790 MPN NAS1189E06T4Socket Head Cap Screw
- 5305-00-680-6047 MPN S2329078-46Close Tolerance Screw
- 5305-00-982-3093 MPN NAS1189C3P12LSocket Head Cap Screw
- 5305-01-123-2389 MPN NAS1190-08P5BSocket Head Cap Screw
- 5940-00-465-6149 MPN NAS1744-1Conductor Splice
- 5940-01-382-2946 MPN NAS1063A16-3Terminal Board Marker Strip
- 1680-01-532-3043 MPN NAS521-46-12Aircr Air Duct Hose
- 5940-01-381-7166 MPN NAS1063B204-215Terminal Board Marker Strip
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-827-1972 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS20033-1 | National Aerospace Standards |
LE20033-1 | Lawrence Engineering And Supply Inc |
MS20033-1 | Military Standards |
MS20033-1 | National Aerospace Standards |
MS20033-1 | Military Standards |
LE20033-1 | Lawrence Engineering And Supply Inc |
MS20033-1 | National Aerospace Standards |
MS20033-1 | Military Standards |
LE20033-1 | Lawrence Engineering And Supply Inc |