NSN 5306-00-889-9040
Coaxial Connector
2.441 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.435 inches .
Manufacturer part number 783617-9 for national stock number 5306008899040.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-889-9040.
-
MPN or Model
783617-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
2.441 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.435 inches -
Hole Diameter
0.048 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
2.125 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-014-4381 MPN 767189-1Lo Support Assembly
- 1560-00-027-1375 MPN 766892-11Insulation Blanket
- 1560-00-072-4546 MPN 386569-2Floor Fitting
- 1560-00-075-4605 MPN 786410-85Pitot Pre Tube Assy
- 1560-00-077-1138 MPN 3P21021-102Aircraft Access Cover
- 1560-00-081-0638 MPN 4E22135-101ABaggage Compartment Liner Panel
- 1560-00-114-2352 MPN 4E52028-102BTrim Frame Cover
- 1560-00-191-1406 MPN 10-179207Cabin Tube Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-889-9040 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
783617-9 | Lockheed Martin Corporation |