NSN 5306-00-917-6268
Coaxial Connector
2.050 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS674V26D for national stock number 5306009176268.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-6268.
-
MPN or Model
NAS674V26D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
2.050 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.869 inches first hole -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5905-01-263-1788 MPN NAS43D01-16Inductive Wire Wound Fixed Resistor
- 5940-01-606-8690 MPN M81714/3-DA1Sectional Terminal Junction Block
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-001-4017 MPN NAS1352-3LE8PSocket Head Cap Screw
- 5305-00-001-6673 MPN NAS1220-3-4Machine Screw
- 5305-00-003-9266 MPN NAS514P1032-19Machine Screw
- 5305-00-007-1559 MPN NAS1100E04-16PMachine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-6268 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS674V26D | National Aerospace Standards |