NSN 5306-00-917-8070
Coaxial Connector
0.500 inches fastener length, double hexagon extended washer head style, 0.618 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number LWB22-10-8 for national stock number 5306009178070.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-8070.
-
MPN or Model
LWB22-10-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.868 inches -
Fastener Length
0.500 inches -
Head Style
Double hexagon extended washer -
Head Height
0.618 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Extended Washer Diameter
1.045 inches -
Extended Washer Thickness
0.150 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-478-9983 MPN AIC79-3-8Close Tolerance Screw
- 5305-00-505-2678 MPN LS15262V4-10Machine Screw
- 5305-00-702-9131 MPN 3MA333CFA11Machine Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-01-076-4881 MPN NAS1101-06-10Machine Screw
- 5305-01-163-7424 MPN AIC1023H4-7Close Tolerance Screw
- 5305-01-206-5449 MPN A1C4037-04-02Machine Screw
- 5305-01-260-8940 MPN LD111-0044-0712Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-8070 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LWB22-10-8 | Sps Technologies, Llc |
AIC220EL10-8 | Sps Technologies, Llc |
VS2201F10-8 | Alcoa Global Fasteners, Inc. |
LWB22-10-8 | Sps Technologies, Llc |
C083-10-8 | Lockheed Martin Corporation |