NSN 5305-00-441-0198
High Torque Screw
Between 5.700 inches and 5.747 inches fastener length, flat countersunk head style, 0.890 inches head diameter, grip diameter: between 0.4358 inches and 0.4367 inches .
Manufacturer part number AIC82-7-84 for national stock number 5305004410198.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-441-0198.
-
MPN or Model
AIC82-7-84
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.440 inches and 0.507 inches -
Fastener Length
Between 5.700 inches and 5.747 inches -
Head Style
Flat countersunk -
Head Diameter
0.890 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
Between 5.240 inches and 5.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-054-6677 MPN SK2015-620Machine Screw
- 5305-00-316-8116 MPN AIC818-3-206CSocket Head Cap Screw
- 5305-00-505-2835 MPN LS15267V3-35Machine Screw
- 5305-01-059-3573 MPN NAS1101E08-14Machine Screw
- 5305-01-076-4881 MPN NAS1101-06-10Machine Screw
- 5305-01-158-5370 MPN AI940-3-6Machine Screw
- 5305-01-203-1664 MPN BACB30LU4-18Close Tolerance Screw
- 5305-01-216-6604 MPN AIC4037-04-21Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-441-0198 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC82-7-84 | Sps Technologies, Llc |
VS2545T7F84 | Alcoa Global Fasteners, Inc. |
SFT22-7A84 | Sps Technologies, Llc |
C082-7-84 | Lockheed Martin Corporation |
SFT22-7A84 | Sps Technologies, Llc |