NSN 5306-00-931-2801
Coaxial Connector
Between 1.460 inches and 1.507 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number AIC516B-18 for national stock number 5306009312801.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-931-2801.
-
MPN or Model
AIC516B-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.392 inches -
Fastener Length
Between 1.460 inches and 1.507 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp h11 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
26512-gb511b5 manufacturers standard
More from these suppliers
- 5305-00-508-6231 MPN LS15266V3-8Close Tolerance Screw
- 5305-00-526-1037 MPN BACB30LU3-7Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-464-4371 MPN VCL0009-3-8Close Tolerance Screw
- 5305-01-495-9164 MPN 3M1170C4-14AClose Tolerance Screw
- 5305-01-513-9648 MPN ST3M557-5-7Close Tolerance Screw
- 5306-00-019-9428 MPN BACB30LM10DU44Close Tolerance Bolt
- 5306-00-062-5110 MPN 3M33-7H16Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-931-2801 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC516B-18 | Sps Technologies, Llc |
BM55132-5-18A | Huck International, Inc. |
VS2521F5-18 | Arconic Global Fasteners & Rings, |
AIC220-5A18 | Sps Technologies, Llc |
EWSB22D5-A18 | Sps Technologies, Llc |
VS2521F5-18 | Alcoa Global Fasteners, Inc. |
EWSB22D5-A18 | Sps Technologies, Llc |
EWSB22-5A18 | Sps Technologies, Llc |
EWSB22-5A18 | Sps Technologies, Llc |
GB511B5-18 | Valley-todeco, Inc. |
GB511B5-18 | Sps Technologies, Llc |
GB511B5-18 | Northrop Grumman Systems Corporation |
202-15520-5-18 | Triumph Aerostructures, Llc |
C081-5-18 | Lockheed Martin Corporation |
BM55132-5-18A | Huck Intl Inc |