NSN 5306-00-939-0812
Coaxial Connector
1.762 inches fastener length, double hexagon w/hole head style, 0.300 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number MBT50-4-20 for national stock number 5306009390812.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-939-0812.
-
MPN or Model
MBT50-4-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.492 inches -
Fastener Length
1.762 inches -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 8740 or steel comp e4340 or steel comp 4340 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-512-8353 MPN 3M1170C3-6AFClose Tolerance Screw
- 5306-00-235-2852 MPN BACB30LJ3-4Close Tolerance Bolt
- 5306-00-321-9194 MPN VAL23029-4-9Close Tolerance Bolt
- 5306-00-332-4467 MPN VAL23033-4-12Close Tolerance Bolt
- 5306-01-040-4700 MPN BACB30LM4-5Shear Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-203-2824 MPN 69-63788-602Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-939-0812 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MBT50-4-20 | Hi-shear Corporation |
MS21250-04020 | Valley-todeco, Inc. |
MS21250-04020 | Arconic Global Fasteners & Rings, |
MS21250-04020 | Sps Technologies, Llc |
MS21250-04020 | Sps Technologies, Llc |
MS21250-04020 | All Manufacturers, Inc. |
MS21250-04020 | Alcoa Global Fasteners, Inc. |
MS21250-04020 | Textron Fastening Systems |
VFK100G-04020 | Valley-todeco, Inc. |
MS21250-04020 | National Aerospace Standards |
LS35105-04-020 | Lockheed Martin Corporation |
6300778-04020 | Naval Sea Systems Command |
MS21250-04020 | Military Standards |
MS21250-04020 | Huck Intl Inc |
MS21250-04020 | Mercury Aerospace Fasteners Inc |
MS21250-04020 | Allen Mfg Co |