NSN 5306-00-955-8690
Coaxial Connector
4.372 inches fastener length, double hexagon w/hole head style, 0.557 inches head height, width between flats: between 0.616 inches and 0.627 inches .
Manufacturer part number NASM21250-09056 for national stock number 5306009558690.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-955-8690.
-
MPN or Model
NASM21250-09056
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.852 inches -
Fastener Length
4.372 inches -
Head Style
Double hexagon w/hole -
Head Height
0.557 inches -
Width Between Flats
Between 0.616 inches and 0.627 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
0.133 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
3.500 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-568-0715 MPN ST3M454-76L20Close Tolerance Screw
- 5306-00-040-9525 MPN GB511BY4M6Shear Bolt
- 5306-00-062-5110 MPN 3M33-7H16Machine Bolt
- 5306-00-762-2903 MPN MS21250-06022Shear Bolt
- 5306-00-958-9326 MPN VFG100G-04022Shear Bolt
- 5306-01-092-2095 MPN J643P16AMachine Bolt
- 5306-01-142-3546 MPN VAL23608-5D70Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-955-8690 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM21250-09056 | National Aerospace Standards |
MS21250-09056 | Valley-todeco, Inc. |
MS21250-09056 | Sps Technologies, Llc |
MS21250-09056 | Arconic Global Fasteners & Rings, |
MS21250-09056 | Hi-shear Corporation |
MS21250-09056 | Alcoa Global Fasteners, Inc. |
MS21250-09056 | Sps Technologies, Llc |
MS21250-09056 | Sps Technologies, Llc |
MS21250-09056 | All Manufacturers, Inc. |
MS21250-09056 | Textron Fastening Systems |
MS21250-09056 | Military Standards |
MS21250-09056 | Huck Intl Inc |
VFK100G-09056 | Valley-todeco, Inc. |
MS21250-09056 | Huck International, Inc. |
MS21250-09056 | Mercury Aerospace Fasteners Inc |