NSN 5306-01-006-2398
Coaxial Connector
2.064 inches fastener length, double hexagon w/hole head style, 0.464 inches head height, width between flats: between 0.547 inches and 0.562 inches .
Manufacturer part number EWBM26-7-20 for national stock number 5306010062398.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-006-2398.
-
MPN or Model
EWBM26-7-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.814 inches -
Fastener Length
2.064 inches -
Head Style
Double hexagon w/hole -
Head Height
0.464 inches -
Width Between Flats
Between 0.547 inches and 0.562 inches -
Extended Washer Diameter
Between 0.820 inches and 0.830 inches -
Extended Washer Thickness
0.083 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
1.250 inches -
Features Provided
Casehardened -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Minimum Yield Strength
145000 pounds per square inch -
Material
Steel -
Material Specification
Sps-m-573 fscm 56878 mfr ref single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-435-9101 MPN NAS1189-3P20LSocket Head Cap Screw
- 5305-00-929-6337 MPN NAS1124-3Close Tolerance Screw
- 5305-00-975-1760 MPN 64228V4-9Machine Screw
- 5305-01-025-6430 MPN 12705L6C32DShoulder Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-035-6142 MPN NAS1189-3P12NHSocket Head Cap Screw
- 5305-01-042-8835 MPN 67077-3-12Close Tolerance Screw
- 5305-01-070-2096 MPN NAS1124E4Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-006-2398 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWBM26-7-20 | Sps Technologies, Llc |