NSN 5306-01-009-2254
Coaxial Connector
Hexagon head style, between 0.359 inches and 0.391 inches head height, between 1.052 inches and 1.065 inches width between flats, grip diameter: between 0.7477 inches and 0.7488 inches .
Manufacturer part number 160D960123-11 for national stock number 5306010092254.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-009-2254.
-
MPN or Model
160D960123-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Hexagon -
Head Height
Between 0.359 inches and 0.391 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7477 inches and 0.7488 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.110 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 1.770 inches and 1.775 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.181 inches first hole -
Material
Steel -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-0484 MPN A51E20143-23Exhaust Duct Link
- 5935-00-008-8316 MPN GC860BN10MElectrical Connector Shell
- 1560-00-037-1491 MPN 89457-22Stack Assemlby
- 1560-00-047-1987 MPN 89TM1571-1Fitting Assembly
- 1560-00-047-2030 MPN 89WM1097-2Hinge Asy
- 5935-00-053-4382 MPN GC805H78PAElectrical Receptacle Connector Body
- 1560-00-066-2892 MPN 123W10072-5Wing Leading Edge
- 5985-00-089-4651 MPN 128SCAV195-23Antenna Pedestal
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-009-2254 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D960123-11 | Northrop Grumman Systems Corporation |
160D960123-11 | Northrop Grumman Systems Corporation |