NSN 5305-00-151-6936
High Torque Screw
Between 0.969 inches and 1.000 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 1128CSM46504-13 for national stock number 5305001516936.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-6936.
-
MPN or Model
1128CSM46504-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.719 inches and 0.750 inches -
Fastener Length
Between 0.969 inches and 1.000 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.075 inches all holes and 0.080 inches all holes -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.070 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-626-2726 MPN 99-3711Aircraft Maintenance Fixture
- 5305-00-182-9415 MPN SC1708-52Machine Screw
- 5305-00-764-3022 MPN 3M46-4-11Machine Screw
- 5305-00-882-1106 MPN 3MA334CFA21Machine Screw
- 5305-00-975-1760 MPN VT1040-4-9Machine Screw
- 5305-01-105-1809 MPN HT4067-4-9Close Tolerance Screw
- 5305-01-176-2462 MPN BACB30LH3-2Close Tolerance Screw
- 5305-01-190-2189 MPN SC2174V08-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-6936 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1128CSM46504-13 | Northrop Grumman Systems Corporation |
1128CSM46504-13 | Arconic Global Fasteners & Rings, |
1128CSM46504-13 | Sps Technologies, Llc |
1128CSM46504-13 | Hi-shear Corporation |
1128CSM46504-13 | Lisi Aerospace Canada Corp |
1128CSM46504-11 | Northrop Grumman Systems Corporation |
1128CSM46504-13 | Northrop Grumman Systems Corporation |