NSN 5306-01-009-7104
Wheel Bolt
Between 0.615 inches and 0.635 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number MS9492-04 for national stock number 5306010097104.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-009-7104.
-
MPN or Model
MS9492-04
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.507 inches and 0.547 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.088 inches and 0.108 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-053-0114 MPN MS3100R16-11SElectrical Receptacle Connector
- 5935-00-079-4631 MPN MS3116J18-32SXElectrical Plug Connector
- 5935-00-103-7912 MPN MS24264Electrical Receptacle Connector
- 5935-00-114-0731 MPN MS3111F14-5SElectrical Plug Connector
- 5905-00-116-9814 MPN RC20BF475KComposition Fixed Resistor
- 5935-00-146-4526 MPN MS27506B16-2Electrical Connector Cable Clamp
- 5935-00-147-9604 MPN MS3144E12-50PElectrical Receptacle Connector
- 5935-00-149-3340 MPN MS3102A20-7SElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-009-7104 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9492-04 | Military Standards |