NSN 5306-01-011-4362
Close Tolerance Hex Head Bolt
Between 2.478 inches and 2.498 inches fastener length, dished hexagon head style, between 0.157 inches and 0.172 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS27576-5-32 for national stock number 5306010114362.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-011-4362.
-
MPN or Model
MS27576-5-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.311 inches and 0.378 inches -
Fastener Length
Between 2.478 inches and 2.498 inches -
Head Style
Dished hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Locking Feature
Detent ring grip -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 2.000 inches and 2.016 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.363 inches first hole and 2.393 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5305-00-020-2826 MPN NAS1221-08-10PMachine Screw
- 5305-00-079-1751 MPN NAS1101C3-26Machine Screw
- 5305-00-082-1995 MPN NAS1352C02-3PSocket Head Cap Screw
- 5305-00-097-8959 MPN NAS1190-06PP7KSocket Head Cap Screw
- 5305-00-207-1790 MPN NAS517-6-11Machine Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-011-4362 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-5-32 | National Aerospace Standards |
MS27576-5-32 | Military Standards |