NSN 5306-01-028-0179
Coaxial Connector
Between 0.930 inches and 0.950 inches fastener length, double hexagon w/hole head style, between 0.255 inches and 0.275 inches head height, width between flats: between 0.240 inches and 0.260 inches .
Manufacturer part number MS21250-03008 for national stock number 5306010280179.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-028-0179.
-
MPN or Model
MS21250-03008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.420 inches and 0.460 inches -
Fastener Length
Between 0.930 inches and 0.950 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.255 inches and 0.275 inches -
Width Between Flats
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
Between 0.045 inches and 0.065 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3087 MPN LS15264V06-12Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-462-2836 MPN 3M1169V4-7AClose Tolerance Screw
- 5305-01-476-0845 MPN BACS12CK06D14Machine Screw
- 5306-00-084-0610 MPN VAL22034-8F18Shear Bolt
- 5306-01-025-4822 MPN VCD0020-8-33Shear Bolt
- 5306-01-044-6541 MPN VAL23607-3-17Shoulder Bolt
- 5306-01-054-3408 MPN C7521-4-9Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-028-0179 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-03008 | Military Standards |
VFK100G-03008 | Valley-todeco, Inc. |