1-321-802-5889

NSN 5306-01-030-1765

Close Tolerance Hex Head Bolt

About this product

Between 1.171 inches and 1.218 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .

Manufacturer part number ST3M729-5D13 for national stock number 5306010301765.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-030-1765.

  • MPN or Model

    ST3M729-5D13

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.349 inches and 0.416 inches
  • Fastener Length
    Between 1.171 inches and 1.218 inches
  • Head Style
    Double hexagon
  • Head Height
    Between 0.177 inches and 0.197 inches
  • Width Between Flats
    Between 0.492 inches and 0.502 inches
  • Grip Diameter
    Between 0.3115 inches and 0.3120 inches
  • Shank Unthreaded Hole Diameter
    0.076 inches first hole and 0.081 inches first hole
  • Thread Diameter
    0.312 inches
  • Grip Length
    Between 0.802 inches and 0.822 inches
  • Thready Qty Per Inch (tpi)
    24
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.043 inches first hole and 1.110 inches first hole
  • Material
    Steel comp xm-13
  • Material Specification
    Ams 5629 assn standard single material response
  • Thread Series Designator
    Unjf
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-030-1765 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306010301765

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
ST3M729-5D13 Huck International, Inc.
ST3M729-5D13 Valley-todeco, Inc.
ST3M729-5D13 Sps Technologies, Llc
ST3M729-5D13 Sps Technologies, Llc
MB145-5D13 Hi-shear Corporation
ST3M729-5D13 Alcoa Global Fasteners, Inc.
MB145-5D13 Lisi Aerospace Canada Corp
ST3M729-5D13 Boeing Company, The
ST3M729-5D13 Hi-shear Corporation
ST3M729-5D13 Huck Intl Inc
ST3M729-5D13 Reid Products Inc.
ST3M729-5D13 Arconic Global Fasteners & Rings,
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.