NSN 5306-01-169-6767
Coaxial Connector
Between 1.196 inches and 1.226 inches fastener length, spline extended washer head style, between 0.168 inches and 0.188 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number S343-3-13 for national stock number 5306011696767.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-169-6767.
-
MPN or Model
S343-3-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.424 inches -
Fastener Length
Between 1.196 inches and 1.226 inches -
Head Style
Spline extended washer -
Head Height
Between 0.168 inches and 0.188 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Head Minor Diameter
Between 0.222 inches and 0.227 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-134-2723 MPN ST3M714-6-14Close Tolerance Screw
- 5305-01-462-2726 MPN 3M1169V4-12AClose Tolerance Screw
- 5305-01-512-8306 MPN 3M1170D4-5AFClose Tolerance Screw
- 5305-01-535-8273 MPN BACB30LH3U15Close Tolerance Screw
- 5306-00-512-6421 MPN VEP220555-4-14Machine Bolt
- 5306-01-010-2346 MPN GB511GF6-17Shear Bolt
- 5306-01-054-8384 MPN BACB30MT5T24Shear Bolt
- 5306-01-056-5442 MPN BACB30LM4-15Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-169-6767 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S343-3-13 | Huck International, Inc. |
ST3M753-3-13 | Boeing Company, The |
ST3M753-3-13 | Sps Technologies, Llc |
ST3M753-3-13 | Valley-todeco, Inc. |
ST3M753-3-13 | Sps Technologies, Llc |
ST3M753-3-13 | Hi-shear Corporation |
ST3M753-3-13 | Sps Technologies, Llc |
ST3M753-3-13 | Alcoa Global Fasteners, Inc. |
ST3M753-3-13 | Lisi Aerospace Canada Corp |
S343-3-13 | Huck Intl Inc |
VS3190-3-13 | Arconic Global Fasteners & Rings, |
PBF1267-3-13 | Sps Technologies, Llc |
VFK600-3-13 | Valley-todeco, Inc. |
AIC763-3-13 | Sps Technologies, Llc |
122897-3-13 | Sps Technologies, Llc |
VS3190-3-13 | Alcoa Global Fasteners, Inc. |
MB156-3-13 | Hi-shear Corporation |
GS1032-3-13 | B & B Specialties Inc. |