NSN 5306-01-033-2662
Close Tolerance Hex Head Bolt
Between 1.000 inches and 1.030 inches fastener length, undercut hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30NE6H7 for national stock number 5306010332662.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-033-2662.
-
MPN or Model
BACB30NE6H7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 1.000 inches and 1.030 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Hole Configuration Style
Hexagon corners -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ne manufacturers standard
More from these suppliers
- 5305-00-505-3211 MPN LS15264V04-13Machine Screw
- 5305-01-211-0682 MPN BACB30LH3U29Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30NF6H18Close Tolerance Bolt
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-00-218-1489 MPN VFK100G-09064Shear Bolt
- 5306-01-004-9527 MPN VAL23029-8D29Close Tolerance Bolt
- 5306-01-045-6584 MPN VAL23607-3-31Shoulder Bolt
- 5306-01-046-5296 MPN VAL23608-5D16Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-033-2662 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE6H7 | The Boeing Company |
BACB30NE6H7 | Sps Technologies, Llc |
BACB30NE6H7 | Valley-todeco, Inc. |
BACB30NE6H7 | Arconic Global Fasteners & Rings, |
BACB30NE6H7 | Federal Manufacturing Corporation |
BACB30NE6H7 | Huck International, Inc. |
BACB30NE6H7 | Sps Technologies, Llc |
BACB30NE6H7 | Sps Technologies, Llc |