NSN 5306-01-040-4695
Coaxial Connector
Between 1.578 inches and 1.608 inches fastener length, double hexagon w/hole head style, 0.254 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number EWB26-4-17 for national stock number 5306010404695.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-040-4695.
-
MPN or Model
EWB26-4-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 1.578 inches and 1.608 inches -
Head Style
Double hexagon w/hole -
Head Height
0.254 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.465 inches and 0.475 inches -
Extended Washer Thickness
0.042 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4903 MPN 3M943C4G3-4Headle Shoulder Pin
- 5305-00-316-7778 MPN AIC812-06-9Machine Screw
- 5305-00-508-7669 MPN AIC84C3-3Machine Screw
- 5305-00-941-3613 MPN NAS1101C01-4Machine Screw
- 5305-01-021-6846 MPN HT4028L4-3Close Tolerance Screw
- 5305-01-052-9112 MPN AIC984-3-7Close Tolerance Screw
- 5305-01-138-7235 MPN ST3M454-7L25Close Tolerance Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-040-4695 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB26-4-17 | Sps Technologies, Llc |
C305-4-17 | Lockheed Martin Corporation |
EWB26-4-17 | Sps Technologies, Llc |
C305-4-17 | Sps Technologies, Llc |
C305-4-17 | Sps Technologies, Llc |
C305-4-17 | Alcoa Global Fasteners, Inc. |