NSN 5306-01-043-0010
Coaxial Connector
Between 1.406 inches and 1.453 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number VEPS156121-5V17 for national stock number 5306010430010.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-043-0010.
-
MPN or Model
VEPS156121-5V17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.334 inches and 0.401 inches -
Fastener Length
Between 1.406 inches and 1.453 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.066 inches all holes and 0.086 inches all holes -
Thread Diameter
0.312 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
250000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.286 inches all holes and 1.318 inches all holes -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
26512-gb511c professional/industrial association standard
More from these suppliers
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-600-3722 MPN 3M1277E3D15AMachine Screw
- 5306-00-205-3521 MPN MS21250-05052Shear Bolt
- 5306-00-357-1829 MPN VAL23029-7D24Close Tolerance Bolt
- 5306-01-031-1446 MPN BACB30NF5H27Close Tolerance Bolt
- 5306-01-054-3422 MPN C7521L6-19Shear Bolt
- 5306-01-054-4615 MPN BACB30NE7-69Shear Bolt
- 5306-01-142-9895 MPN VAL23607-5-32Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-043-0010 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| VEPS156121-5V17 | Valley-todeco, Inc. |
| EWSB26-5-17 | Sps Technologies, Llc |
| VS3072-5S17 | Alcoa Global Fasteners, Inc. |
| GB511C5A17 | Sps Technologies, Llc |
| GB511C5A17 | Sps Technologies, Llc |
| GB511C5A17 | Northrop Grumman Systems Corporation |
| EWSB26-5-17 | Sps Technologies, Llc |
Stock Check
