NSN 5306-01-050-4987
Coaxial Connector
Between 0.713 inches and 0.833 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number PBF7521-3-8 for national stock number 5306010504987.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-050-4987.
-
MPN or Model
PBF7521-3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.713 inches and 0.833 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.456 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-4217 MPN LS9682V8Machine Screw
- 5305-00-508-2777 MPN LS15267V3-39Machine Screw
- 5305-01-054-2530 MPN BACB30LU4-9Close Tolerance Screw
- 5305-01-303-5634 MPN 3M1034C4-10-21Close Tolerance Screw
- 5305-01-386-2564 MPN VCL0009-3-13Machine Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-541-7497 MPN 3M1170C4-8AFClose Tolerance Screw
- 5305-01-599-5488 MPN PMT1123-10Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-050-4987 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-3-8 | Sps Technologies, Llc |
120978-3-8 | Sps Technologies, Llc |
AIC596-3-8 | Sps Technologies, Llc |
VS3133-3-8 | Alcoa Global Fasteners, Inc. |
C7521-3-8 | Valley-todeco, Inc. |
VCG0009-3-8 | Valley-todeco, Inc. |
VS3133-3-8 | Arconic Global Fasteners & Rings, |
H411-3-8 | Huck International, Inc. |
C7521-3-8 | Sps Technologies, Llc |
C7521-3-8 | Lockheed Martin Corporation |
C7521-3-8 | Alcoa Global Fasteners, Inc. |