NSN 5306-01-052-1184
Coaxial Connector
Between 1.388 inches and 1.435 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number BM17020-7-15A for national stock number 5306010521184.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-052-1184.
-
MPN or Model
BM17020-7-15A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.440 inches and 0.507 inches -
Fastener Length
Between 1.388 inches and 1.435 inches -
Head Style
Double hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
85495-b-17020 manufacturers standard
More from these suppliers
- 5305-00-526-4145 MPN BACB30LU3D15Close Tolerance Screw
- 5305-01-102-5521 MPN ST3M733-3L2Close Tolerance Screw
- 5305-01-462-2737 MPN 3M1169V5-11AClose Tolerance Screw
- 5306-00-143-9669 MPN STSBG004A04U021Shear Bolt
- 5306-01-052-7201 MPN ST3M453-5-12Close Tolerance Bolt
- 5306-01-055-6918 MPN BACB30MT6-21Shear Bolt
- 5306-01-138-5338 MPN VDP0001-6Assembled Washer Bolt
- 5306-01-142-9896 MPN VAL23607-4-7Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-052-1184 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17020-7-15A | Huck International, Inc. |
VS3071-7F15 | Arconic Global Fasteners & Rings, |
VAL22034-7G15 | Valley-todeco, Inc. |
VAL22034-7F15 | Valley-todeco, Inc. |
AIC516B7-15 | Sps Technologies, Llc |
EWSB22D7-A15 | Sps Technologies, Llc |
H401-7-15 | Huck Intl Inc |
VS3071-7F15 | Alcoa Global Fasteners, Inc. |
GB511B7-15 | Sps Technologies, Llc |
GB511B7-15 | Sps Technologies, Llc |
GB511B7-15 | Alcoa Global Fasteners, Inc. |
GB511B7-15 | Northrop Grumman Systems Corporation |
BM17020-7-15A | Huck Intl Inc |
EWSB22D7-A15 | Sps Technologies, Llc |