NSN 5306-00-240-3208
Close Tolerance Hex Head Bolt
Between 1.330 inches and 1.360 inches fastener length, undercut hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30LJ6DU14 for national stock number 5306002403208.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-240-3208.
-
MPN or Model
BACB30LJ6DU14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.495 inches -
Fastener Length
Between 1.330 inches and 1.360 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.159 inches first hole and 1.209 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2801 MPN LS15267V3-15Machine Screw
- 5305-01-486-6481 MPN LD111-0045-2515Close Tolerance Screw
- 5306-01-045-5544 MPN VAL23608-4-10Shoulder Bolt
- 5306-01-054-3421 MPN C7521L6-18Shear Bolt
- 5306-01-207-3020 MPN VCC0020-C12-34Machine Bolt
- 5306-01-219-9122 MPN 3M1043-5-20-82Close Tolerance Bolt
- 5306-01-255-1029 MPN VCG0002-4-8Close Tolerance Bolt
- 5306-01-277-9904 MPN MS21250-10-034Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-240-3208 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ6DU14 | Sps Technologies, Llc |
BACB30LJ6DU14 | Sps Technologies, Llc |
BACB30LJ6DU14 | Sps Technologies, Llc |
BACB30LJ6DU14 | Huck International, Inc. |
BACB30LJ6DU14 | Arconic Global Fasteners & Rings, |
BACB30LJ6DU14 | Valley-todeco, Inc. |
BACB30LJ6DU14 | Arconic Global Fasteners & Rings, |
BACB30LJ6DU14 | Federal Manufacturing Corporation |
BACB30LJ6DU14 | The Boeing Company |
BACB30LJ6DU14 | Alcoa Global Fasteners, Inc. |
BACB30LJ6DU14 | The Boeing Company |
BACB30LJ6DU14 | Sps Technologies Inc |
BACB30LJ6DU14 | Space-lok, Inc. |