NSN 5306-01-053-2807
Close Tolerance Hex Head Bolt
Between 1.536 inches and 1.566 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number 121933-6-18K for national stock number 5306010532807.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-053-2807.
-
MPN or Model
121933-6-18K
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
30 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.447 inches -
Fastener Length
Between 1.536 inches and 1.566 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.108 inches threads and 0.111 inches threads -
Head Minor Diameter
Between 0.564 inches and 0.583 inches -
End Application
F-4 -
Thread Diameter
0.375 inches -
Grip Length
Between 1.146 inches and 1.166 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.659 inches threads and 1.679 inches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-047-4006 MPN 67077-3-11Machine Screw
- 5305-00-078-9636 MPN SFT22-5-11Machine Screw
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
- 5305-00-717-3466 MPN NAS1191-06P8ISocket Head Cap Screw
- 5305-01-049-2275 MPN HT4008-4-11Shoulder Screw
- 5305-01-051-8039 MPN HT4025L3-16Close Tolerance Screw
- 5305-01-054-6257 MPN C7985-3-10Close Tolerance Screw
- 5305-01-059-0192 MPN NAS1190-04P7KMachine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-053-2807 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121933-6-18K | Sps Technologies, Llc |
121933-6-18K | Sps Technologies, Llc |