NSN 5305-00-487-5081
High Torque Screw
Between 0.902 inches and 0.949 inches fastener length, flat countersunk head style, 0.502 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number VS2545T4F10T for national stock number 5305004875081.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-487-5081.
-
MPN or Model
VS2545T4F10T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 0.902 inches and 0.949 inches -
Head Style
Flat countersunk -
Head Diameter
0.502 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.084 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.778 inches first hole and 0.808 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-321-9051 MPN AIC811-06-4Socket Head Cap Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-00-914-5791 MPN R542P02ULMachine Screw
- 5305-01-221-3498 MPN AIC583-136Socket Head Cap Screw
- 5305-01-357-6327 MPN AIC4414-04-11Machine Screw
- 5305-01-381-5721 MPN AIC1652-4-33Close Tolerance Screw
- 5305-01-418-9140 MPN 3M1169V3-24Close Tolerance Screw
- 5305-01-458-7585 MPN AIC1652-8-14AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-487-5081 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2545T4F10T | Alcoa Global Fasteners, Inc. |
AIC793-4-10 | Sps Technologies, Llc |
70302-4-10 | Sps Technologies, Llc |
VS2545T4F10T | Arconic Global Fasteners & Rings, |
C793-4-10 | Lockheed Martin Corporation |